UHV Tube Furnace with 100mm ID Vessel of Ni-Based Alloy @ 1150oC Max. up to 10-6 Torr - OTF-1150X-III-100

OTF-1150X-III-Ni100 is a customized ultra-high vacuum tube furnace up to 10-6 torr and 1150oC Max. working temperature. The processing tube is made of Ni-based super-alloy with 100 mm ID x 110mm OD x1400 mm L. Furnace is 3 zone heating with 600 mm heating length with large turbopump and water cold flange

Specifications

Furnace	Three-zone heating: each zone length 300 mm, a total of 900 mm heating length Alumina fibrous thermal insulation  Double-layer steel casing with air cooling to keep the outside case temperature lower than 60oC Kanthel Ni-Cr-Al resistance elements. Please click the picture left to see the detailed specification of furnace
Temperature Controller	Three Eurotherm 300 digital temperature controllers are built-in to control each heating zone independently. 24 segment programmable with +/- 0.1ºC accuracy.  RS485 port and software are included for PC operation. Please click the picture left to see the detailed specification of the controller
Processing Tube	The processing tube is made of Ni-based superalloy ( Inconel equivalent ) Tube dimension: 100 ID x 110 OD x 1400mm L  CF type of flanges is built-in the two ends of the tube   Max. working temperature:  1150ºC under high vacuum Max. Vacuum level: 10E-6 torr
Vacuum Pump	700L/S high-speed turbopump station CF160 port connects to the tube flange via a manual gate valve. Pressure gauge and the digital display is included Please click the picture left to see the detailed specification of the turbopump If you prefer the diffusion pump to reduce the cost, please let us know
Power	208 - 240VAC, single phase, 50/60 Hz < 10 KW 50A air breaker required 380VAC, 3 phases, 50/60Hz is available at the extra cost
Compliance & Warranty	CE certified NRTL or CSA certification s available upon request at the extra cost One year limited warranty