This is an SS304 tube vessel with a sealing flange and valves that can be used under oxidation, inert, or reduction gas atmosphere up to 600°C for special compounds processing. Such a tube is also suitable for use with MTI tube furnaces to create a system that satisfies ultra-high vacuum or high-pressure HIP (hot isostatic pressure) applications. Tube diameter is optional at 25, 38, 50, and 76 mm.
| Model Number |
TSS25D600 |
TSS38D600 |
TSS50D1000 |
TSS75D1000 |
| Outside Diameter: |
25 mm |
38mm |
50 mm |
76 mm |
| Inside Diameter: |
21 mm |
32 mm |
44 mm
|
70 mm |
| Tube Length: |
600 mm |
600 mm |
1000 mm
|
1000 mm |
Working Temp.
|
-
600°C continuous (without load)
|
| Working Pressure |
- 15 PSIG ( 1bar)
- High-pressure tube is available upon request
|
| Installation |
- Thoroughly clean the copper gasket before use
- Use torque adjustable wrench to tighten the flange properly
-
Warning:
- Regularly run a visual inspection on the tube surface. The high-pressure vessel is the consumable part, please replace the tube once deformation is noticed.
- Must install a pressure regulator on the gas cylinder side to regulate pressure.
- Service-life design for 2,000 hours at 800C.
|
| Attention: |
- In order to get a longer tube service life, Please use a quartz or alumina crucible to carry the sample, instead of loading the sample directly inside the tube, please click the picture below to choose one crucible boat:
|
