Roll to Roll Micro-battery Electrodes Slitting Machine ( 3 - 10 mm Width) - MSK-CSC-350

Roll to Roll Micro-battery Electrodes Slitting Machine ( 3 - 10 mm Width) - MSK-CSC-350

RM0.00 MYR
RM0.00 MYR
Skip to product information
Roll to Roll Micro-battery Electrodes Slitting Machine ( 3 - 10 mm Width) - MSK-CSC-350
  • Roll to Roll Micro-battery Electrodes Slitting Machine ( 3 - 10 mm Width) - MSK-CSC-350
  • Roll to Roll Micro-battery Electrodes Slitting Machine ( 3 - 10 mm Width) - MSK-CSC-350
  • Roll to Roll Micro-battery Electrodes Slitting Machine ( 3 - 10 mm Width) - MSK-CSC-350
  • Roll to Roll Micro-battery Electrodes Slitting Machine ( 3 - 10 mm Width) - MSK-CSC-350
Roll to Roll Micro-battery Electrodes Slitting Machine ( 3 - 10 mm Width) - MSK-CSC-350

Roll to Roll Micro-battery Electrodes Slitting Machine ( 3 - 10 mm Width) - MSK-CSC-350

SKU: roll-to-roll-micro-battery-electrodes-slitting-machine-3-10-mm-width-msk-csc-350

Price: RFQ

Description

The micro-battery electrodes slitting machine MSK-CSC-350

  • Designed for the micro-batteries, typically, the Bluetooth batteries.
  • Multiple (4+) narrow electrode strips slitting
  • High precision / Tension control / Without the defects such as flounces, burrs, and indentation



Working Voltage
  • 380V AC, Three-phase, 50/60 Hz
Power
  • 10 kW
Compressed Air
  • Compressed air of 0.7 MPa is needed for the operation of this machine
  • Please note the air compressor is not included. Please click the picture below to order one at MTI, or order it from your local hardware store
  • Attention: If a gas cylinder is used instead of an air compressor(pic2), (Please click here to order)
  • Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. 
                  
Reeling and Unreeling
  • Automatic Tension control: 0 - 100 N, +/- 2 N;
  • Maximum Reeling Diameter: 350 mm
  • Maximum Unreeling Diameter: 450 mm
  • Automatic unwinding correction, accuracy ± 0.5mm
Cutting Width
  • Total cutting width: 300 mm, Each electrode strip range: 3 - 10 mm width,
  • No flounces, burrs, and indentation
  • 4 or more narrow electrode strips slitting; the widths of the electrode strips are preset and fixed
  • Replace the space jacket to manually adjust the width at extra cost
  •  
Cutting Thickness
  • 10 um - 300 um
Cutting Speed
  • 0 - 40 m/min