Lab-Scale 3 in 1 Fluid Bead Processor for Powder Granulation, Coating & Drying - QFN-BY-300

• Contact parts in SS 316 and non-contact parts SS 304
• Single Pot Technology for mixing, granulating, drying & coating
• Shorter cycle time
• Highest Degree of Safety
• Spaying system with the precise flow control peristaltic pump
• Spraying flow rate controlled by the Peristaltic pump manually
• Spraying nozzle 0.7 mm size that can be installed in either top or bottom
• Inlet Air system with filter and electric heater
• Airflow control by AC Frequency Drive for Exhaust Blower
• Sight Glass for process visualization
• Air pressure controls switch for safety
• All rubber seal made from silicon food grade
• Easy mechanism to change from process of granulation to coating

• AC 208V 50/60Hz, Three Phases
• 3.5 KW
• The power plug is not included. Please click here to order the plug according to your lab requirement

• 7" Touch Screen Panel to display and set all parameters
• USB port built-in

• 5 Liter made of SS 304 ( SS 316 is available upon request at the extra cost )
• The one spray gun port on top and one in the bottom
• Spare spray port on the top of the container is available upon request at the extra cost

• 25g Min. and 300g Max.

• 40 - 150C with accuracy +/- 2C

• One spray gun included, which can be installed either on top or bottom according to your application
• Nozzle hole 0.7mm diameter
• The spare spray gun is available at the extra cost
• Optional: Temperature controlled nozzle up to 450ºC is available upon request at the extra cost.

• Pressure: 7 bar
• Airflow: 0-150 m/h

Peristaltic pump

• Max. 1000ml/h

• < 60db

• Electrical Supply 3 Ph Model with Max. 20KW
• Air pressure: 7 Bar