Skip to product information
5T Max. Precision Programmable Nail Penetration Tester ( 0.01 - 500mm/m) w/ Heating Oven - MSK-TE501
  • 5T Max. Precision Programmable Nail Penetration Tester ( 0.01 - 500mm/m) w/ Heating Oven - MSK-TE501
5T Max. Precision Programmable Nail Penetration Tester ( 0.01 - 500mm/m) w/ Heating Oven - MSK-TE501

5T Max. Precision Programmable Nail Penetration Tester ( 0.01 - 500mm/m) w/ Heating Oven - MSK-TE501

SKU: msk-te501

Price: RFQ

Specifications

 MSK-TE501 is a precision nail penetration tester driven by a DC motor with variable speeds from 0.01 to 500 mm/minute , and a penetration force of max. 50 KN for battery research. The tester is controlled by a laptop computer with 0.005 mm position accuracy and is built inside an explosion-proof chamber with automatic pressure relief. SPECIFICATIONS Power AC 110-240V Single Phase, 50/60 Hz 1000W 20 A air creaker is required A 10 ft power cable without a plug Penetration Speed & Force The penetration nail is driven by a servo motor with a precision lead screw Penetration force: 100N - 50KN ( 5T) measured by precision load sensor with +/- 0.5% accuracy Moving speed: 0.01 mm/minute --- 500 mm/minute programmable via PC Travel distance 300 mm Max with position accuracy +/- 0.005 mm Sample fixture: Not included, but available based on customer design at the extra cost Heating Chamber A convection heating oven with inside dimensions 350x350x350mm is put on the bottom Oven power: 220oC +/-10% , 2500W The nail can pass through the oven via the hole on the top of the oven 30 segments programmable temperature controller is included at a remote location with +/- 1oC accuracy Max. working temperature 200oC One 2" venting port is included for connecting to the lab venting system One 1" cable feedthrough port is included for connecting related electronic device One 1/4" ss tube with a solenoid valve is inserted into the tube and connected N2 tank. Once the oven temperature > 250C, N2 gas will blow N2 gas into the oven to reduce firing Steel Nail The nail is available upon request, not included Control Panel The device is controlled by a remote laptop computer to program penetration speed and depth The laptop and Software are included for immediate use. Explore-proof Chamber Internal Chamber size: 750 W x 700 D x 1900 H, mm Double-layer steel chamber for explosion containment Inside chamber: made of 1.5 mm thick cold-rolled SS304 with tensile strength > 500 Mpa Outside casing: made of 1.5 mm thickness annealed A3 steel with Tensile strength > 400 Mpa Explosion containment window: 280 x 280 mm Double layer 5 mm thick explosion containing glass with double-sided shard holding the film to ensure broken glass can not fly out in the case of explosion 4“ Venting port and pressure release door is built in the back of the chamber (Pic. 4) Battery Placement Area: 310 x 310 x 340 mm Max. Payload: 60Kg A Four-wheel is installed on the bottom for movable Compliance CE Certified NRTL certification (UL61010) or CSA certification is available upon request at extra cost.

Power
  • AC 110-240V Single Phase, 50/60 Hz 
  • 1000W
  • 20 A air creaker is required
  • A 10 ft power cable without a plug

Penetration Speed & Force
  • The penetration nail is driven by a servo motor with a precision lead screw
  • Penetration force: 100N - 50KN ( 5T) measured by precision load sensor with +/- 0.5% accuracy
  • Moving speed: 0.01 mm/minute --- 500 mm/minute programmable via PC
  • Travel distance 300 mm Max with position accuracy +/- 0.005 mm 
  • Sample fixture: Not included, but available based on customer design at the extra cost

 Heating Chamber
  • A convection heating oven with inside dimensions 350x350x350mm is put on the bottom
  • Oven power: 220oC +/-10% , 2500W
  • The nail can pass through the oven via the hole on the top of the oven
  • 30 segments programmable temperature controller is included at a remote location with +/- 1oC accuracy
  • Max. working temperature 200oC
  • One 2" venting port is included for connecting to the lab venting system
  •  One 1" cable feedthrough port is included for connecting related electronic device
  • One 1/4" ss tube with a solenoid valve is inserted into the tube and connected N2 tank. Once the oven temperature > 250C, N2 gas will blow N2 gas into the oven to reduce firing

 Steel Nail
  • The nail is available upon request, not included

Control Panel
  • The device is controlled by a remote laptop computer to program penetration speed and depth
  • The laptop and Software are included for immediate use.

 Explore-proof Chamber
  • Internal Chamber size: 750 W x 700 D x 1900 H, mm
  • Double-layer steel chamber for explosion containment
    • Inside chamber: made of 1.5 mm thick cold-rolled SS304 with tensile strength > 500 Mpa
    • Outside casing: made of 1.5 mm thickness annealed A3 steel with Tensile strength > 400 Mpa
  • Explosion containment window: 280 x 280 mm
    • Double layer 5 mm thick explosion containing glass with double-sided shard holding the film to ensure broken glass can not fly out in the case of explosion
    • 4“ Venting port and pressure release door is built in the back of the chamber (Pic. 4)
  • Battery Placement Area: 310 x 310 x 340 mm
  • Max. Payload: 60Kg
  • A Four-wheel is installed on the bottom for movable

Compliance
  • CE Certified
  • NRTL certification (UL61010) or CSA certification is available upon request at extra cost.

You might also like...