Hi-Pressure Induction Melting-Casting or Infiltrating System (1 Mpa @ 1700C Max.) - IMCS-1700HP

Hi-Pressure Induction Melting-Casting or Infiltrating System (1 Mpa @ 1700C Max.) - IMCS-1700HP

RM0.00 MYR
RM0.00 MYR
Skip to product information
Hi-Pressure Induction Melting-Casting or Infiltrating System (1 Mpa @ 1700C Max.) - IMCS-1700HP
  • Hi-Pressure Induction Melting-Casting or Infiltrating System (1 Mpa @ 1700C Max.) - IMCS-1700HP
  • Hi-Pressure Induction Melting-Casting or Infiltrating System (1 Mpa @ 1700C Max.) - IMCS-1700HP
  • Hi-Pressure Induction Melting-Casting or Infiltrating System (1 Mpa @ 1700C Max.) - IMCS-1700HP
  • Hi-Pressure Induction Melting-Casting or Infiltrating System (1 Mpa @ 1700C Max.) - IMCS-1700HP
  • Hi-Pressure Induction Melting-Casting or Infiltrating System (1 Mpa @ 1700C Max.) - IMCS-1700HP
  • Hi-Pressure Induction Melting-Casting or Infiltrating System (1 Mpa @ 1700C Max.) - IMCS-1700HP
Hi-Pressure Induction Melting-Casting or Infiltrating System (1 Mpa @ 1700C Max.) - IMCS-1700HP

Hi-Pressure Induction Melting-Casting or Infiltrating System (1 Mpa @ 1700C Max.) - IMCS-1700HP

SKU: imcs-1700hp

Price: RFQ

Description

 IMCS-1700HP is a High-Pressure induction melting/casting furnace which can granulate various alloys up to 2 kg at Max. 1700 ºC under high-pressure Ar gases up to 10 bars, and also can be used to separate melt from slag or make composite by melt infiltration SPECIFICATIONS: Induction Heating Power Source Working Voltage: 220V AC, 50/ 60Hz, Three Phases (380VAC, 3phase available upon request) Working Current: 10~86 Amps (100A breaker required) Max. Input Power: 25 KW Output Frequency: 30 - 80 kHz Duty Cycle: 100% Induction Coil: 170mm(ID) x 110 mm(H) Air Cooling: Rear Fan Protection: Automatic water pressure, over-temperature, and overpower protection Refractory Assembling: Complete refractory assembling made of alumina, including bottom crucible support, crucible holder, and cover Melting Chamber ( Top) the chamber is made of SS304 with a water cooling jacket to ensure surface temperature < 60ºC. Chamber size: 350 mm 10 bars ( 1 MPamax. working pressure with a safety release valve and safety cover High-quality fibrous alumina insulation. > 116 L/minute cooling water is required to cool the induction coil. May click the picture below to order one Temperature Control Precision temperature controller with 30 segments programmable Automatic PID control with the protection of over-temperature and thermal couple failure. Thermal couple: B type Working temperature range: 500~1600, 1700 Max. (<1hour ). Temperature stability : +/- 5 Manual temperature control for the fast heating 4/second(1000-1200) 3/second(1200~1500) 1~2/second (1500~1700) Casting Chamber ( Bottom ) The bottom chamber is made of SS304 with KF 25 vacuum port Accommodates flasks 5'' diameters x 9" high is inside the bottom chamber to accept casting\ Vacuum requirement: 1bar (-29.9" Hg) at sea level The digital vacuum gauge is included to monitor vacuum pressure Double stage rotary vane vacuum pump is included with this casting system Crucible One set of high purity graphite crucible is included for max. 1000 g capacity ( Fe based alloy) The crucible bottom is sealed from the bottom chamber to keep high pressure A thermal insulation component is included. Graduating crucible and grain-making tank is available at additional cost. for casting 1- 6 mm sphere bead The customized graphite crucible for melt Infiltrating is available upon request. Compliance CE certified NRTL or CSA certification is available upon request. Warning This is high-pressure equipment! Must wear goggles when operating. Must use the pressure regulator to limit input gas pressure below 10 bars

Induction Heating Power Source
  • Working Voltage: 220V AC, 50/ 60Hz, Three Phases (380VAC, 3phase available upon request)
  • Working Current: 10~86 Amps (100A breaker required)
  • Max. Input Power: 25 KW 
  • Output Frequency: 30 - 80 kHz 
  • Duty Cycle: 100%
  • Induction Coil: 170mm(ID) x 110 mm(H) 
  • Air Cooling: Rear Fan
  • Protection: Automatic water pressure, over-temperature, and overpower protection
  • Refractory Assembling: Complete refractory assembling made of alumina, including bottom crucible support, crucible holder, and cover
Melting Chamber ( Top)
   

  • the chamber is made of SS304 with a water cooling jacket to ensure surface temperature < 60ºC.
  • Chamber size: 350 mm
  • 10 bars ( 1 MPamax. working pressure with a safety release valve and safety cover
  • High-quality fibrous alumina insulation.
  • > 116 L/minute cooling water is required to cool the induction coil. May click the picture below to order one
Temperature Control
  • Precision temperature controller with 30 segments programmable
  • Automatic PID control with the protection of over-temperature and thermal couple failure.
  • Thermal couple: B type
  • Working temperature range: 500~1600, 1700 Max. (<1hour ).
  • Temperature stability : +/- 5 
  • Manual temperature control for the fast heating
    • 4/second(1000-1200)
    • 3/second(1200~1500)
    • 1~2/second (1500~1700)
Casting Chamber ( Bottom )
  • The bottom chamber is made of SS304 with KF 25 vacuum port
  • Accommodates flasks 5'' diameters x 9" high is inside the bottom chamber to accept casting\
  • Vacuum requirement: 1bar (-29.9" Hg) at sea level
  • The digital vacuum gauge is included to monitor vacuum pressure
  • Double stage rotary vane vacuum pump is included with this casting system
 
Crucible
  • One set of high purity graphite crucible is included for max. 1000 g capacity ( Fe based alloy)
  • The crucible bottom is sealed from the bottom chamber to keep high pressure
  • A thermal insulation component is included.
  • Graduating crucible and grain-making tank is available at additional cost. for casting 1- 6 mm sphere bead
  • The customized graphite crucible for melt Infiltrating is available upon request. 

 

         

 
Compliance
  • CE certified
  • NRTL or CSA certification is available upon request.
Warning
  • This is high-pressure equipment! Must wear goggles when operating.
  •  Must use the pressure regulator to limit input gas pressure below 10 bars