1700C Max 4 Channel Tube Furnace (1" Alumina Tube) for Hi-Throughput Annealing - GSL-1700X-MGI-4

• The furnace is consistent with 4 small tube furnace modules with alumina tube 25 OD x 22 ID x 460 L, mm 
• Each heating module's temperature is controlled independently up to 1700°C
• Quickly sealed flange, Vacuum gauge, and flowmeter are installed to allows heat treatment under vacuum or flowing gas
• Processing 4 samples with the different temperatures at compact space 

• MoSi2 heating elements (40mm x147mm)
• Each channel with 4 heating elements, a total of 16 are installed

Working Temperature &
Constant Temperature Zone

• Continuous Working Temperature 1600°C
• Maximum Working Temperature 1700°C (< 1 hrs)
• Constant temperature zone:
• +/- 1°C within center 30 mm cubic zone
• +/- 5°C within center 60 mm cubic zone

• High purity alumina tube with Φ25X L 460 mm, 4 tubes included
• 4 flowmeters are included 
• The quickly clamped flange of KF25 with mechanical vacuum gauge and needle valves
• Max. Vacuum 10-5 torr by turbopump
• Only one vacuum pump required via a KF25 port. Click the picture below to choose a vacuum pump

• Touch screen precision temperature controller with the protection of over-temperature and Thermal couple broke.
• 4 channel heating tube is controlled independently by 30 segments programmable temperature controller
• 4 B type Thermal Couple
• PC control software is included, which can control 4 channel heaters by one Laptop

Heating Rate

•  10 °C/ min Max.

Temperature Accuracy

• +/- 1°C

Power & Working Voltage

• 6 KW, 208 - 240V single phase, 50/60Hz ( if 4 heating modules operation in the same time )
• Three-phase, AC 380V - 460V available upon request.
• Note Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug.

Laptop, software & WiFi Control(Optional)

• Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
• Labview Based Temperature Control System (MTS01) enables the user to edit temperature profiles, manage heat-treatment recipes, record and plot data for MTI furnaces.
• A wireless remote control provides up to 300 meters of operating range.
• The above features are available upon request at an extra cost (up to $1,000).n.

• CE Certified
• NRTL (UL61010) or CSA certification is available upon request at extra cost.

Warning &
Application note