Three Zone Alumina Tube Furnace with Vacuum* Flanges (60, 80 or 100mm OD. 1700C Max.) - GSL-1700X-60-III

Three Zone Alumina Tube Furnace with Vacuum* Flanges (60, 80 or 100mm OD. 1700C Max.) - GSL-1700X-60-III

80mm
RM0.00 MYR
RM0.00 MYR
Skip to product information
Three Zone Alumina Tube Furnace with Vacuum* Flanges (60, 80 or 100mm OD. 1700C Max.) - GSL-1700X-60-III
  • Three Zone Alumina Tube Furnace with Vacuum* Flanges (60, 80 or 100mm OD. 1700C Max.) - GSL-1700X-60-III
Three Zone Alumina Tube Furnace with Vacuum* Flanges (60, 80 or 100mm OD. 1700C Max.) - GSL-1700X-60-III

Three Zone Alumina Tube Furnace with Vacuum* Flanges (60, 80 or 100mm OD. 1700C Max.) - GSL-1700X-60-III

SKU: gsl-1700x-60-iii

Price: RFQ

Description

 GSL-1700X-60-III is a CE certified 60mm or 80mm OD three zones tube furnace with complete vacuum sealing flange. Each heating zone is 12" in length and controlled by three precision 30 segments of digital temperature controllers independently. One zone (center zone) is heated bySuper-1800 MoSi2 elements up to 1700°C, and another two zones are heated by SiC elements up to 1400°C. The tube furnace can create the various thermal gradient by adjusting three zones temperature. It is an excellent furnace to prepare functional materials under thermal gradient, and also can be used for epitaxial film growth by CVD. SPECIFICATIONS Furnace Structure Double-layer steel case with two cooling fans, which ensure low surface temperature High purity fibrous alumina insulation for energy saving Power 10KW (75A air breaker required ) Voltage AC 208-240 Single Phase, 50/60 Hz Max. Temperature Zone one: 1400 °C (1500 °C<1hour), Zone two: 1700 °C Zone Three: 1400°C (1500 °C<1hour) Max. Heating Rate <=10 °C /min Normal Heating/cooling Rate 5°C /min Thermal Block Placement Two thermal blacks are included. Please picture below to learn how to place them inside the tube You may order flange support to avoid tube rotating ( click Pic below right ) Heating Zone Length Three zones: total 25" (630 mm) heating zone (included two refractory separators) Zone 1: 7.5" (190 mm) heated by 4 pcs U type SiC(30x300 mm) Working temperature 400 - 1400°C (1500 °C<1hour) Heating rate: 10°C/min Zone 2: 10" (250 mm) heated by 6 pcs U type MoSi2 (30x300 mm) working temperature 800 - 1700°C Max. Heating rate: 5°C/min Zone 3: 7.5" (190 mm) heated by 4 pcs U type SiC(30x300 mm) Working temperature 400 - 1400°C (1500 °C<1hour) Max. Heating rate: 10°C/min Constant Temperature Zone Length ( 3 controllers at the same temperature): 200mm with+/- 1C) Tube Size and Flange 99.8% purity Alumina Tube 2-3/8" ( 60mm) O.D.x 2-1/8"I.D. (54mm) x 48" (1200mm) Length 60 mm stainless steel vacuum sealing flange with valve and meter is included Two porous ceramic blocks are included for protecting flange from heating radiation Vacuum pressure  can reach to 10 -4 torr with the turbo vacuum pump Fitting Ports In order to increase the throughput and achieve high vacuum, you may replace the standard barbed hose fitting with the KF25 adapter , please click underline to order. For supplying high-pressure gas, you may replace the standard barbed hose fitting with the Swagelok Tube Fitting, please click underline to order Temperature Controllers Three digital controllers with microprocessor-based PID control and self-tuning Each has 30-segments programmable with protection for overheated and broken thermocouple Temperature Accuracy: +/- 1ºC Thermal Couple: One B type(210mm long TC for the central zone), two S type (210mm long TC for side zones) European Temperature Controllers (optional upgrade) 1 heating channel 1 program of 8 or 24 segment Alarm Relay: Form 'A' and Form ‘C’ built-in Digital Communications: RS485 Temperature Accuracy: ± 0.1ºC Recipes: Using a PC tool recipes can be created that can be used to change the operating parameters of the 3000 simply by selecting a new recipe via the HMI. This is very useful where multiple products are processed using the same controller but require different parameters to be set. Power Cable & Plug 10 feet length 8-3 AWG heavy duty UL approved power cable is included Extra length cable can be ordered by click picture left The plug is not included. You can order from the local hardware store according to female plug in your lab Laptop, software & WiFi Control (Optional) Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) Labview Based Temperature Control System ( MTS01 ) enables user to edit temperature profile, manage heat-treatment recipe, record and plot data for MTI furnaces. A wireless remote control provides up to 300 meters operating range. The above features are available upon request at an extra cost (up to $1,000). Please contact us for more information. Note: The software is only compatible with MTI’s Yudian Temperature Controller Compliance CE Certified NRTL or CSA Certification is available upon request, additional charges will apply Application Notes How to set up the ceramic tube and vacuum flange for MTI Tube furnace. How to use and maintain Alumina tube in MTI high-temperature tube furnace. In order to obtain accurate temperature inside tube furnace, you need to calibrate temperature before use, please click here to learn how. Optional Parts Please clicks here to order spare alumina tube 60 mm O.D.  x1200 mm L Please click here to order spare 1800oC grade MoSi2 heating elements (6pcs) Please click here to order Heavy duty mobile cart for carrying the furnace Please click here to order digital vacuum gauge for precision vacuum control up to 10 -4 torr Warnings Please click here to learn the installation of a gas regulator . The tube furnaces with alumina tube are designed for use under vacuum and low pressure < 0.02 Mpa / 0.2 Bar/ 3 PSI Never use graphite crucible in the alumina tube. Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator . The gas flow rate should be limited to < 200 SCCM ( or 200ml/min ) Vacuum limit definition for all alumina tube furnaces: * Vacuum pressures may only be safely used up to 1500°C


Furnace Structure
  • Double-layer steel case with two cooling fans, which ensure low surface temperature
  • High purity fibrous alumina insulation for energy saving

Power

 10KW (75A air breaker required )

Voltage

 AC 208-240 Single Phase, 50/60 Hz

Max. Temperature

 Zone one: 1400 °C (1500 °C<1hour), Zone two: 1700 °C Zone Three: 1400°C (1500 °C<1hour)

Max. Heating Rate

 <=10 °C /min

Normal Heating/cooling Rate

 5°C /min


Thermal Block Placement
  • Two thermal blacks are included. Please picture below to learn how to place them inside the tube
  • You may order flange support to avoid tube rotating ( click Pic below right )
       
        
Heating Zone Length
  • Three zones: total 25" (630 mm) heating zone (included two refractory separators)
    • Zone 1: 7.5" (190 mm) heated by 4 pcs U type SiC(30x300 mm) 
      • Working temperature 400 - 1400°C (1500 °C<1hour)
      • Heating rate: 10°C/min
    •  Zone 2: 10" (250 mm) heated by 6 pcs U type MoSi2(30x300 mm)
      • working temperature 800 - 1700°C
      • Max. Heating rate: 5°C/min
    • Zone 3: 7.5" (190 mm) heated by 4 pcs U type SiC(30x300 mm)
      • Working temperature 400 - 1400°C (1500 °C<1hour)
      • Max. Heating rate: 10°C/min
  • Constant Temperature Zone Length ( 3 controllers at the same temperature): 200mm with+/- 1C)

Tube Size and Flange
  • 99.8% purity Alumina Tube
  • 2-3/8" ( 60mm) O.D.x 2-1/8"I.D. (54mm) x 48" (1200mm) Length
  • 60 mm stainless steel vacuum sealing flange with valve and meter is included
  • Two porous ceramic blocks are included for protecting flange from heating radiation
  • Vacuum pressure  can reach to 10-4 torr with the turbo vacuum pump
Fitting Ports
  • In order to increase the throughput and achieve high vacuum, you may replace the standard barbed hose fitting with theKF25 adapter, please click underline to order.
  • For supplying high-pressure gas, you may replace the standard barbed hose fitting with the Swagelok Tube Fitting, please click underline to order



Temperature Controllers
  • Three digital controllers with microprocessor-based PID control and self-tuning
  • Each has 30-segments programmable with protection for overheated and broken thermocouple
  • Temperature Accuracy: +/- 1ºC
  • Thermal Couple: One B type(210mm long TC for the central zone), two S type (210mm long TC for side zones)

European Temperature Controllers (optional upgrade)
  • 1 heating channel
  • 1 program of 8 or 24 segment
  • Alarm Relay: Form 'A' and Form ‘C’ built-in 
  • Digital Communications: RS485
  • Temperature Accuracy: ± 0.1ºC
  • Recipes: Using a PC tool recipes can be created that can be used to change the operating parameters of the 3000 simply by selecting a new recipe via the HMI. This is very useful where multiple products are processed using the same controller but require different parameters to be set.
Power Cable & Plug
  • 10 feet length 8-3 AWG heavy duty UL approved power cable is included
  • Extra length cable can be ordered by click picture left
  • The plug is not included. You can order from the local hardware store according to female plug in your lab

Laptop, software & WiFi Control (Optional)
  • Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) 
  • Labview Based Temperature Control System (MTS01)enables user to edit temperature profile, manage heat-treatment recipe, record and plot data for MTI furnaces.
  • A wireless remote control provides up to 300 meters operating range.
  • The above features are available upon request at an extra cost (up to $1,000). Please contact us for more information.
  • Note: The software is only compatible with MTI’s Yudian Temperature Controller

  •    

Compliance
  • CE Certified
  • NRTL or CSA Certification is available upon request, additional charges will apply

Application Notes

Optional Parts

Warnings
                         

   Please click here to learn the installation of a gas regulator. 
  • The tube furnaces with alumina tube are designed for use under vacuum and low pressure < 0.02 Mpa / 0.2 Bar/ 3 PSI 
  • Never use graphite crucible in the alumina tube.
  • Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
  • The gas flow rate should be limited to < 200 SCCM ( or 200ml/min )
  • Vacuum limit definition for all alumina tube furnaces: * Vacuum pressures may only be safely used up to 1500°C