Formed 4662 Pouch Cell Case, L 62mm x W 46mm x T 1-6mm, 50pcs/Bag -PLiB-54560

Case Dimensions

• Outside Dimension after sealing: 46 Width x 62 Length (mm)
  Formed thickness options: From 1 mm to 5 mm; Please select the option from the optional bar
  

Net Weight

• 200g (50 pcs)

• Polyamide (JIS Z1714):                           0.025mm(+-0.0025mm)
• Adhesive (Polyester-polyurethane):         4-5g/m2
• Aluminum foil (JIS A8079,A8021):          0.040mm(+-0.004mm)
• Adhesive (Urethane-free Adhesive):         2-3g/m2
• Polypropylene:                                     0.040mm(+-0.004mm)

Thickness:           

• 111μm±11μm 

Surface Quality

• Matte finish

Pinholes

• Subject to the applicable aluminum foil standard

Impurity

• 1mm or less in diameter

Fish Eye

• 2mm or less in diameter(clear)
• 1mm or less in diameter(colored) 

• 200ppm / 5 years 

Laminate Strength

• Nylon/Al      more than 2N/15mm
• Al/CPP       more than 5N/15mm

Heat Seal Strength

• More than 29.4N/15mm wide at 200 x 0.2Mpa x2 sec by MTI's heat sealing equipment MSK-140 and

Solvent Retention

• Less than 5mg/m2

Appearance

• Within the sample of the limit

Optional

• You may use the compact die cutter to make electrode sheet and fit into the case

 Click picture below to learn how to make a polymer battery:

Step 1

Step 2

Step 3

Step 4