Flame Assisted Spray Pyrolysis Equipment with 6"x6" Heating Plate - MSK-TH-04FA

Flame Assisted Spray Pyrolysis Equipment with 6"x6" Heating Plate - MSK-TH-04FA

Spray Pyrolysis Coating Equipment with Microsoft Surface Pro
RM0.00 MYR
RM0.00 MYR
Skip to product information
Flame Assisted Spray Pyrolysis Equipment with 6"x6" Heating Plate - MSK-TH-04FA
  • Flame Assisted Spray Pyrolysis Equipment with 6"x6" Heating Plate - MSK-TH-04FA
Flame Assisted Spray Pyrolysis Equipment with 6"x6" Heating Plate - MSK-TH-04FA

Flame Assisted Spray Pyrolysis Equipment with 6"x6" Heating Plate - MSK-TH-04FA

SKU: flame-assisted-spray-pyrolysis-equipment-with-6x6-heating-plate-msk-th-04fa

Price: RFQ

Description

 MSK-TH-04FA is a spray pyrolysis coating equipment developed for research in the surface quality improvement of metallic alloys and ceramics. Spray pyrolysis is a process in which a thin film is deposited by atomizing and spraying a solution on a heated surface, where the constituent reacts to form a chemical compound. In flame-assisted spray pyrolysis, this spray is heated by a flame produced by an oxy-LPG gas mixture, before being deposited onto the substrate. In this technique, the solution is sprayed onto a heated substrate through an LPG flame . The chemical reactants are selected such that products other than the desired compound are volatile at the temperature of deposition. The process is generally useful for the deposition of oxides onto metal and ceramic substrates and particularly suitable for the deposition of Al2O3, ZnO, and metastable solid solutions of ZnO-MgO and ZrO2-Y2O3 on amorphous silica and Nickel-based superalloys The equipment is fitted with accessories required for controlling the flame during the process. The solution is sprayed using a positive displacement pump and compressed air through a mixing chamber and nozzle. The substrate is placed on a hot plate, the temperature of which can be set at the desired level through a dedicated controller. The hot plate is mounted on a motorized XY platform to move the substrates during the coating process in the required sequence so that uniform coating is achieved The flow rate of the solution and the motion sequence of the substrate are controlled through a personal computer. The flame is initiated and set at the required intensity level manually using the control accessories fitted with the equipment. As the solution is sprayed with the help of compressed air, the equipment can be used for spray pyrolysis without flame as well. The combination of pyrolysis thin films with and without flame can also be produced on the same substrates in successive operations. SPECIFICATIONS: Input Voltage AC 208~240V Single-phase Liquid Dispensing Unit Actuator Stepper motor Dispensing rate 1 - 20ml / min. Dispensing unit capacity 50ml & 250ml A syringe pump is controlled by an included Laptop computer or Microsoft Surface Pro Air Sprayer One Compressive air spray nozzle is included Sprayer traverse  X - Y 20 0mm max. Drive speed X axis (min-max) 5 - 20 mm/sec Drive speed Y axis (min-max)  2 - 12 mm/sec Heatable Plate Dimension:  175 X 175mm Max. temperature:  500°C PC connection: RS232 Port PC Software is included for customer installation Air Pump & Gases One compact air compressor (5.5 gals; 220V 50Hz) is included for immediate use. Oxygen gas and LPG gas are required for operation (not included). US standard Hose, Regulator, and Valve Assembly are included for easy connection to LPG gas tanks. 10 PSI Regulator 48 Inch High-Pressure Hose Brass Control Valve 3/8 Inch Flare Swivel Fitting Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn about the installation of a gas regulator . pic1 pic2 Gas Flow Control Integrated O2 & LPG gas float meters allow easy adjustment of the gas flow rate and thus the flame size. LPG Gas Float Meter: 0~2L/min O2 Float Meter: 0~25L/min Gases tanks are not included Ignition System This system features Automatic Ignition Switch which allows the operator to ignite the flame safely. Pressure Regulator & Gauge A pressure regulator with a digital gauge is installed on the machine for precise air pressure control. The digital pressure gauge is operated by a 3V lithium battery ( included ) Water Cooling Continuous water circulation for cooling the Flame head is required. Water temperature < 25C Pressure ~20PSI 6mm O.D Water Tubing Inlet/Outlet Software Centralized software control of almost all processing parameters One software interface for the syringe pump, XY target, and rotating drum collector All of the process parameters can be saved as a user program and retrieved for analysis or rerun One brand new laptop computer or one Microsoft Surface Pro with pre-installed software is available for controlling. (Please select it at the optional bar) Dimension Compliance CE certified Warranty One year limited with lifetime support (demo before purchase available) Operation Instruction & Demo Video Application Note Factors affecting bonding and subsequent build-up of the coating may be as the below:   It is the researcher's responsibility to find the best processing parameters Cleanliness Surface area Surface topography or profile Temperature ( thermal energy ) Time ( reaction rates, cooling rates etc.) Speed Physical & chemical properties Physical & chemical reactions Please click here to find related articles---Flame Assisted Spray Pyrolysis Warning: LPG is flammable.  Operators must be trained well and professionally. Shipping Weight & Dimensions Two pallets 990 lbs with 56"x45"x70" 400 lbs with 48"x40"x46" Application Notes Be cautious of using hazardous materials. The working chamber of this unit is not flame-proof, explosive proof or vacuum-sealed. Contact your health and safety department manager for detailed material handling instruction and prevention/protection practices and recommendations.

Input Voltage AC 208~240V Single-phase
Liquid Dispensing Unit 
  • Actuator Stepper motor
  • Dispensing rate 1 - 20ml / min.
  • Dispensing unit capacity 50ml & 250ml
  • A syringe pump is controlled by an included Laptop computer or Microsoft Surface Pro
                 
Air Sprayer
  • One Compressive air spray nozzle is included
  • Sprayer traverse  X - Y 200mm max.
  • Drive speed X axis (min-max) 5 - 20 mm/sec
  • Drive speed Y axis (min-max)  2 - 12 mm/sec
Heatable Plate
  • Dimension:  175 X 175mm
  • Max. temperature:  500°C
  • PC connection: RS232 Port  
  • PC Software is included for customer installation
Air Pump & Gases
  • One compact air compressor (5.5 gals; 220V 50Hz) is included for immediate use.
  • Oxygen gas and LPG gas are required for operation (not included).
  • US standard Hose, Regulator, and Valve Assembly are included for easy connection to LPG gas tanks.
    • 10 PSI Regulator
    • 48 Inch High-Pressure Hose
    • Brass Control Valve
    • 3/8 Inch Flare Swivel Fitting
  • Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn about the installation of a gas regulator.
               pic1                pic2
Gas Flow Control

 Integrated O2 & LPG gas float meters allow easy adjustment of the gas flow rate and thus the flame size.
  • LPG Gas Float Meter: 0~2L/min
  • O2 Float Meter: 0~25L/min
  • Gases tanks are not included
Ignition System
This system features Automatic Ignition Switch which allows the operator to ignite the flame safely.
Pressure Regulator & Gauge
  • A pressure regulator with a digital gauge is installed on the machine for precise air pressure control. 
  • The digital pressure gauge is operated by a 3V lithium battery ( included )
Water Cooling
  • Continuous water circulation for cooling the Flame head is required. 
    • Water temperature < 25C
    • Pressure ~20PSI
    • 6mm O.D Water Tubing Inlet/Outlet
Software
  • Centralized software control of almost all processing parameters
  • One software interface for the syringe pump, XY target, and rotating drum collector
  • All of the process parameters can be saved as a user program and retrieved for analysis or rerun
  • One brand new laptop computer or one Microsoft Surface Pro with pre-installed software is available for controlling. (Please select it at the optional bar)
Dimension
Compliance CE certified
Warranty One year limited with lifetime support (demo before purchase available)
Operation Instruction
&
Demo Video		     
Application Note
  • Factors affecting bonding and subsequent build-up of the coating may be as the below:   It is the researcher's responsibility to find the best processing parameters
    • Cleanliness
    • Surface area
    • Surface topography or profile
    • Temperature ( thermal energy )
    • Time ( reaction rates, cooling rates etc.)
    • Speed
    • Physical & chemical properties
    • Physical & chemical reactions
  • Please click here to find related articles---Flame Assisted Spray Pyrolysis
  • Warning: LPG is flammable.  Operators must be trained well and professionally.
Shipping Weight & Dimensions Two pallets
990 lbs with 56"x45"x70"
400 lbs with 48"x40"x46" 
Application Notes
  • Be cautious of using hazardous materials. The working chamber of this unit is not flame-proof, explosive proof or vacuum-sealed. Contact your health and safety department manager for detailed material handling instruction and prevention/protection practices and recommendations.