Desk-Top Battery Pack Tab Spot Welder - MSK-330P

MSK-330P is a tab Spot Welder for making a larger battery pack manually. It is designed for the production of battery pack manufacturers (Alkaline, NiMH. NiCd, Li-Ion/LiMnNi. LifePO4, NMC) with more reliable and consistent welding.
It could be used for AA / AAA / C / D / F/ M / 10440 / 14430 / 14500 / 14650 / 17500 / 18650 / 26650 / 38120 / 40160 sizes of batteries. 

Features	Pneumatic System with foot panel for faster operation Microcomputer single-chip control, the welder may achieve single-pulse, double-pulse, or multi-pulse welding and can weld tab up to 0.5 mm Adjustable welding head ( up and down ) for easy operation
Working Voltage	208-240V AC, 50/60Hz (110V is available via a transformer)
Output Power	15 KVA
Welding	Programmable Dual Welding Process Variable Height of Welding Head Adjustment Support nickel-plated tab thickness up to 0.5mm Independently adjust for the pressure of two welding probes, ensuring stable and reliable welding pressure Small heat affected weld zones Capable of extremely fine energy adjustment; Current: 0-99% Adjustable
Welding probes	Allow independent adjustment for pressure Ensure consistent welding pressure Fully eliminates the phenomenon of low voltage or condensation occurred to lithium batteries after welding Homogeneous welding spot, small spark, and no black spots, and stable welding current Quick energy release for welding highly conductive metals such as copper Small heat affected weld zones
Welding Switch	Built-in optoelectronic welding switch, which can eliminate the need of changing switches for similar welding machines
Controller	Digital LED control panel for setting all parameters All parameters are set via microcomputer. Adopts LCD display and keypad adjustment, resulting in accuracy, visualization, and easy operation Pre-welding time: 0 - 99 ms Welding time: 0 - 999 ms Welding current: 1- 30A
Tab Thickness Applicable	0.2 - 0.5mm thickness tab (10 pcs 0.2mm Tab will be provided in the package for customer's practice)
Pneumatic Control (Not included)	Air pressure at 0.2Mpa ~ 0.8Mpa is required for the operation (Air Compressor is not included. (Please click here to order) Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation.  Click here to learn the installation of a gas regulator.
Working Space	Max. The opening between the welding tip and bottom stage is 9cm (19cm by removing the bottom stage) Max. Depth is 8.5cm (measured from the center of the bottom stage till the backend of the machine)
Safety Protection	Fuse to Protect Over Current Warning Lights for Switch device / Weld Head Transformer / Air Supply
Compliance	CE certified NRTL / CSA certification is available upon request at the extra cost.
Application Notes	Welding current can be as high as 600A, voltage is 6V Please click here to learn the basic knowledge of Capacitive Discharge Spot Welder Avoid touching weld spots immediately after the weld has been performed as they will be hot Always wear safety glasses when working with spot welders and weld heads Be careful not to pinch fingers in moving weld head parts or between welding electrodes Remove hand jewelry before welding Tab Size Reference Setting: Purchase replacement electrode here. Tab Size Welding Time Welding Current 0.254mm Tabs 25ms Welding Time 70% Welding Current 0.180mm Tabs 25ms Welding Time 55% Welding Current 0.110mm Tabs 25ms Welding Time 40% Welding Current *Setting may require slight adjustment between various tabs and batteries for best performance