MSK-EC-200 is a corona (also called Air plasma) treatment machine that is mainly used for the pre-processing of various cast film substrates. This device adopts a ceramic roller for discharging electrodes, it is capable of processing conductive materials such as copper foil, aluminum foil, and others. This device uses high-frequency and high-voltage electric power to generate corona discharge between the electrodes and produce low-temperature plasma, thereby modifying the polarization of the surface of the conductive foil. Such a technique can improve the adhesion of the substrate as well as the coating quality. It is widely used for materials modification, grafting, casting coating, ink printing and etc.
|
Feature
|
- Used for the pre-processing of various substrates. for better coating
- Uses high-frequency and high-voltage (3kV) electric power to generate corona discharge between the electrodes and produce a low-temperature plasma
- Improves the adhesion of the substrate as well as the coating quality
|
|
Working Voltage
|
220 VAC ± 10%, single phase 50/60Hz
110V version will be available with 3000W transformer at the extra cost
|
|
Working Frequency
|
8KHz - 21KHz |
|
Max. Power Consumption
|
2 KW
|
|
Max. Treating Width
|
200 or 300mm width selectable
|
|
Safety Measures
|
- Built-in overload limits for the input voltage, short circuit or open circuit on output, ground, etc.
- Security alarm in case of accident/error occurs.
- Equipped with a 100 mm diameter vent port, it can be connected to the pipeline and eliminate any generated ozone gas during operation.
|
|
Gas Pressure Requirement
|
- A 0.4 - 0.6 Mpa of air force is required to raise the gap of the cleaner.
- Air compressors and fittings are not included. Please click here to order or order from your local hardware store. Gas/Air tube size is 6.
|
|
Dimension
|
- Controller Box: 300mm L x 500mm W x 240mm H
- Roller Unit: 600mm L x 320mm W x 370mm H
|
|
Application Notes
|
- The optional roll-to-roll system and coating system can improve the adhesion of the substrate's surface and improve the coating quality. Please contact us for more details.
  
|
| Warning |
- This equipment must be placed on a flat and stable working platform.
- Store in a dry environment, avoid moisture and rain.
- This equipment must be grounded during operation.
- Ozone will be generated while the equipment is running, be sure to evacuate the ozone gas.
- Insolation gloves must be worn during the operation.
|
