Description
FEATURE
- High-Temperature Stability to 1650°C
- Withstands water and steam after curing
- Safe to Use - Non-Flammable
- Excellent Thermal Shock Resistance
- Low Shrinkage, High Strength
- Available - Off the Shelf
- Single Part System
- Made in USA
How to use
- Stir and mix thoroughly.
- Apply for bonding and protecting thermocouples, heat sensors, critical heating elements, laminating, and coating at elevated temperatures.
- Offer high bond strength, solvent, and electrical resistance.
- Bonding alumina, metals, ceramics, graphite, and glass.
- Air dry for 4 hours minimum.
- Post cure 2 hours at 150 o F (65 o C) followed by 4 hours at 392 o F (200 o C) for additional moisture resistance.
- It is excellent for repairing inside the chamber of MTI Box furnaces.
Note
- This product is pre-mixed. No additional thinner and hardener is necessary
- Please don't use it as a refractory coating for the fibrous ceramic board, which may cause surface cracking
- Routine stir is necessary after opening the box
- Shelf life: 6 months at room temperature
Physical Properties
- Max. Use Temp.: 3000°F (1650°C)
- Base Al2O3
- Compressive Strength: 3,000 psi
- Flexural Strength: 1,100 psi
- Dielectric Strength: 200 volts/mil
- Specific Heat: 0.24 BTU / # oF
- Volume Resistance: 10^8
- Thermal Conductivity: 15.0 BTU in/hr. oF ft.2
- Thermal Expansion: 4.5 x 10-6/ F
- Color: White
- Consistency: Creamy Paint
For mixture
For powder