Description
BNL-12D is a 10.75 mm ID pressing die with BN or Peek liner for electric insulation, which allows applying the electric field during pressing. It is a good tool for the Cold Sintering Process (CSP) of ceramic, Polymer, or ceramic-polymer composite materials for the applications such as microwave dielectric materials, solid-state electrolyte, and semiconductors;
- Please click here to download SDS
| Working Temperature |
- Cold Sintering Process with the high electrical field.
- BN: 250oC
- Peek: 180oC
|
| Max Load |
- 9 Metric Ton (at room temperature), or 980 MPa
- Note: BN liner is one-time use and not rated for strength.
|
| Die and Punching Rod |
- In order to use the BN liner, you must use the special die and pushing rod as the picture below ( please choose from the product options bar)
|
| Attention & Warnings |
- For the cold sintering press with the high electrical field experiment, the BN liner could be a one-time use. It is strongly recommended to get the spare liners.
- Max. the working temperature in CSP with the high electrical field is 450°C
- The BN liners shall be stored in a dry environment inside a sealed container.
- Never wash the liner with water. Use fine sandpaper or cloth to remove any dirt or residue.
- Not suitable for use with Sb2O3, chromium oxide, molybdenum trioxide, arsenic trioxide, titanium carbide, high lead glass glaze, boron phosphate, potassium phosphate, chlorine
|
