Skip to product information
Semi-Automatic Winder for Large Prismatic Cells - MSK-112A-RS250
  • Semi-Automatic Winder for Large Prismatic Cells - MSK-112A-RS250
Semi-Automatic Winder for Large Prismatic Cells - MSK-112A-RS250

Semi-Automatic Winder for Large Prismatic Cells - MSK-112A-RS250

SKU: semi-automatic-winder-for-large-prismatic-cells-msk-112a-rs250

Price: RFQ

Specifications

 MSK-112A-RS250 is a semi-automatic winder for large prismatic cells. Manually feed the positive and negative electrodes into the winding slots, then roll up with t he separator films (sandwiched between the cathode and anode materials) into a cell core at constant tension force. This is an ideal tool that provides the reliability and precision to produce high-quality windings of electrode cores. SPECIFICATIONS: Features Easy touchscreen control Positioning of electrode slot with adjustable position and width Adjustable tension, winding speed, and winding cycles High winding alignment accuracy Manual loading and unloading of electrode sheets, automatic winding Settable separator tension control Small footprint for laboratory use Input Power AC220±5% V, 50Hz, s ingle-phase, 3 kW power Winding Needle Width 100 - 190 mm Separator Width 100250mm Cathode / Anode Feeding Width: 98247mm Length: 3003000mm Width of Strapping Tape 1020mm Working Environment No corrosive gases, liquids, or explosive gases near the equipment Winding Accuracy Alignment accuracy between the separator and negative electrodes: ≤ ± 0.7 mm Alignment accuracy between the positive and negative electrodes: ≤ ± 0.7 mm Compressed Air pic1 pic2 Compressed air of 57kgf/cm²100L/min is needed for the operation of this machine. Please note the air compressor is not included . Please click the picture on the left to order one at MTI, or order it from your local hardware store. Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator Optional MTI provides complete sets of equipment for the research of rechargeable battery materials. Please refer to http://www.mtixtl.com/batterycapacitorequipment.aspx Consumables can be ordered at MTI at an extra cost Size 2400mm L × 1700mm D ×1700mm H Net Weight 600 kg Warranty One-year limited warranty with lifetime support Rusting or damage due to improper storage conditions or maintenance is not covered by warranty Compliance CE Certified NRTL or CSA Certification is available upon request at extra cost Application Notes Place the machine on a flat surface free of vibration to avoid tipping the equipment Do not change the factory settings of air cylinders without consulting MTI. Beware not to change the air cylinder settings by accident. Take extra caution when operating the cutter and motor to avoid possible physical injury! Do not touch the cutter with your hand! Do not put a hand close to the cutter while the equipment is operating! Do not let hands, hair, or clothes get caught in the rolling-clamping-winding assembly! Put up warning signs and warn other people to stay clear of the equipment.

Features
  • Easy touchscreen control
  • Positioning of electrode slot with adjustable position and width
  • Adjustable tension, winding speed, and winding cycles
  • High winding alignment accuracy
  • Manual loading and unloading of electrode sheets, automatic winding
  • Settable separator tension control
  • Small footprint for laboratory use
Input Power
  • AC220±5% V, 50Hz, single-phase,
  • 3 kW power
Winding Needle Width
  • 100 - 190 mm
Separator Width
  • 100250mm
Cathode / Anode Feeding
  • Width: 98247mm
  • Length: 3003000mm
Width of Strapping Tape
  • 1020mm
Working Environment
  • No corrosive gases, liquids, or explosive gases near the equipment
Winding Accuracy
  • Alignment accuracy between the separator and negative electrodes: ≤ ± 0.7 mm
  • Alignment accuracy between the positive and negative electrodes: ≤ ± 0.7 mm
Compressed Air
pic1
pic2
  • Compressed air of 57kgf/cm²100L/min is needed for the operation of this machine.
  • Please note the air compressor is not included. Please click the picture on the left to order one at MTI, or order it from your local hardware store.
  • Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator
Optional
Size
  • 2400mm L × 1700mm D ×1700mm H
Net Weight
  • 600 kg
Warranty
  • One-year limited warranty with lifetime support
  • Rusting or damage due to improper storage conditions or maintenance is not covered by warranty
Compliance
  • CE Certified
  • NRTL or CSA Certification is available upon request at extra cost
               
Application Notes
  • Place the machine on a flat surface free of vibration to avoid tipping the equipment
  • Do not change the factory settings of air cylinders without consulting MTI. Beware not to change the air cylinder settings by accident.
  • Take extra caution when operating the cutter and motor to avoid possible physical injury! Do not touch the cutter with your hand! Do not put a hand close to the cutter while the equipment is operating! Do not let hands, hair, or clothes get caught in the rolling-clamping-winding assembly! Put up warning signs and warn other people to stay clear of the equipment.

You might also like...