Pressure Controlled Split Pouch Cell for Both Solid/Liquid-State Battery Research - PSPC

• Pushing plates (top and bottom) are made of stainless steel. (Gold plating is available upon request at extra cost)
  The pouch cell frame is made of Nylon. (Pic.2)
• Configuration 1: One stainless steel spring plate is included for single layer pouch cell assembling.(Pic.4)
• Configuration 2: split-able pouch cell with rubber spacer plate is available on the option bar. (Pic.3&4) Optional mechanical jig fixture and spacer are available from Product Options for sealing the O-rings and applying pressure to the battery assembly
  
  Pic.1      Pic.2                                 Pic.3      Pic.4
  
  

• Simply put electrode, separator, and electrolyte materials into the split cell with no screws required.
• Place the split cell into a mechanical jig fixture to apply pressure without crimping and seal the O-rings. Please select from the Product Options (Pic.1)
• Connect current leads to a battery analyzer for testing the assembled pouch cell
• You may choose a hydraulic press (Pic. 2) or a digital press (Pic. 3 ) to apply pressure by clicking pics below

Pic.1     Pic.2 

Pic.3 

• 20 MPa for Peek materials
• 10 MPa for Nylon materials