Skip to product information
Roll to Roll Pressure Controlled Rolling Press (Roller Width 450 mm) for Battery Electrodes - MSK-DPC-B400-LD
  • Roll to Roll Pressure Controlled Rolling Press (Roller Width 450 mm) for Battery Electrodes - MSK-DPC-B400-LD
Roll to Roll Pressure Controlled Rolling Press (Roller Width 450 mm) for Battery Electrodes - MSK-DPC-B400-LD

Roll to Roll Pressure Controlled Rolling Press (Roller Width 450 mm) for Battery Electrodes - MSK-DPC-B400-LD

SKU: msk-dpc-b400-ld

Price: RFQ

Specifications

 MSK-DPC-B400 is an automatic roll to roll calendar press system with precision digital pressure control for battery electrode production. It has 450 mm width and 400 diameter high strength alloy rollers and can produce electrode up to 400mm width at 20 m/min max speed. SPECIFICATIONS: Working Voltage AC 380V 50/60 Hz, Three Phase Max. Power Consumption 12 KW Rollers (one pair) Dimensions: 400mm (Dia.) x 450mm(W) Material: Hardening Tool Steel with HRC 65, Hardening layer thickness: ~19 mm Effective Rolling Width: 0 -430 mm Max. Diameter of delivering and winding: 400 mm Press gap 0 - 2 mm adjustable Tolerance: 0.001 mm Rolling Speed 0 - 20 Meter / Minute adjustable by Touch Screen Control Panel Temperature (Hot Rolling) MAx. Temperature of 120 °C (if customer requires a higher rolling temperature, please inform us before ordering due to customization cost) Press Flatness Thickness Accuracy: ± 0.0025mm Surface Roughness: < Ra 0.2 Pressure Control Pressure load: 1 - 200 Tons ( 2000KN) adjustable by Touch Screen Control Panel Real time pressure display with data saved function Accessories Included Rolling Roller cleaning service built in Edge cutting device included Dust Removing device installed Roller installation and unload cart included Utility and Environment Compressed air: 0.5~0.8 Mpa (Air compressor is not included) Environment Temperature: 25 ± 3 Environment Humidity: 0~90RH Articles Please refer to this instruction on how to calculate rolling pressure from roller gap (reference only) Analysis of geometric and electrochemical characteristics of lithium cobalt oxide electrode with different packing densities Application Notes It is not allowed to use any MTI product in any hazardous location, especially prohibit from using in Class I environments (flammable gasses & vapor).

Working Voltage
  • AC 380V 50/60 Hz, Three Phase

Max. Power Consumption
  • 12 KW

Rollers (one pair)
  • Dimensions: 400mm (Dia.) x 450mm(W)
  • Material: Hardening Tool Steel with HRC 65,
  • Hardening layer thickness: ~19 mm
  • Effective Rolling Width: 0 -430 mm
  • Max. Diameter of delivering and winding: 400 mm
Press gap
  • 0 - 2 mm adjustable
  • Tolerance: 0.001 mm
Rolling Speed
  • 0 - 20 Meter / Minute adjustable by Touch Screen Control Panel
Temperature (Hot Rolling)
  • MAx. Temperature of 120 °C (if customer requires a higher rolling temperature, please inform us before ordering due to customization cost)

Press Flatness
  • Thickness Accuracy: ± 0.0025mm
  • Surface Roughness: < Ra 0.2

Pressure Control
  • Pressure load: 1 - 200 Tons ( 2000KN) adjustable by Touch Screen Control Panel
  • Real time pressure display with data saved function

Accessories Included
  • Rolling Roller cleaning service built in
  • Edge cutting device included
  • Dust Removing device installed
  • Roller installation and unload cart included

Utility and Environment 
  • Compressed air: 0.5~0.8 Mpa (Air compressor is not included)
  • Environment Temperature: 25 ± 3
  • Environment Humidity: 0~90RH

Articles

Application Notes
  • It is not allowed to use any MTI product in any hazardous location, especially prohibit from using in Class I environments (flammable gasses & vapor).

You might also like...