|
Furnace Structure
|
- 1700 grade fiber alumina with reflective coating - max energy-saving design
- Double layer steel structure with air cooling fan to keep case temperature below 60°C
- A square alumina crucible with lid inside the chamber
- Alumina tube on the left and top of the furnace for gas inlet/outlet from the alumina crucible
- A water chiller placed on top of the furnace for separating and collecting colloid
|
|
Power
|
5.2 KW
|
|
Voltage
|
AC 208V-240V single phase, 50/60 Hz (32A air breaker required)
Note: Plug is not included, and it is suggested you use NEMA L5-30 / NEMA 10-30P plug for AC 110V and NEMA 6-20P plug for AC 208~240V) |
|
Standard Working Temperature
|
1650°C or 2912°F (continuous)
|
|
Maximum Working Temperature
|
1700°C or 3092°F (< 0.5 hours)
|
|
Heating Rate
|
10°C/min (< 1400°C)
5°C/min (1400°C - 1600°C)
2°C/min (> 1600°C)
|
|
Temperature Accuracy
|
+/- 1°C
|
|
Heating Elements
|
Super 1800 grade MoSi2 Heating Elements (30 x 360mm) |
|
Thermocouple
|
B Type (Pt-Rh to Pt-Rh) with Alumina tube |
|
Temperature Controller
|
-
FA-YD518P-AG temperature controller is included
- Proportional–integral–derivative control (PID control) and auto-tune function
- 30 segments programmed with ramping, cooling and dwelling steps
- Built-in over-temperature alarm and thermocouple failure alarm
- +/- 1ºC temperature control accuracy
- Default DB9 PC communication port
|
Temperature controller (optional)
|
- MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for the detail information about the MTS02-Y software kit
- You may upgrade the temperature controller to the Eurotherm 3504 Temperature Controller which is fully compatible with LabVIEW. This package includes a Eurotherm 3504 programmer, a communication cable (RS485 - USB) and a software CD. Click the pic below to view the full spec of Eurotherm 3504 temperature controller
|
| Laptop, software & WiFi Control(Optional) |
- Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) for immediate use
-
Labview Based Temperature Control System (MTS01)enables the user to edit temperature profile, manage heat-treatment recipe, record and plot data for MTI furnaces
- A wireless remote control provides up to 300 meters of operating range
- Above features are available upon request at an extra cost (up to $1,000). Please contact us for more information
-
Note: The software is only compatible with MTI’s Yudian Temperature Controller
-
 
|
| Compliance |
- CE Certified
- NRTL or CSA certification is available upon request at an extra cost
-
   
|
| Application Notes |
- For longer furnace service life, we recommend the heating rate not to exceed 10°C /min
- The cooling rate shall also not exceed 10°C /min
- This furnace lacks vacuum sealing, toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision
- Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating
- Please click here to learn how to DIY gas purging system
- The refractory block must be inserted before closing the door
|
