10 mm ID Multi-Well Pellet Pressing Die Max 90 MPa For HTP Material Research- Die10-SxxHT

Name: 10 mm ID Multi-Well Pellet Pressing Die Max 90 MPa For HTP Material Research- Die10-SxxHT
Brand: MTI
SKU: Die10-SxxHT
Availability: OutOfStock

SKU: die10-sxxht

Price: RFQ

Specifications

Die10-SxxHT is a High Throughput HTP) multi-well pressing dies with 10 mm ID with the standard option, 9, 16, 25, and 36 wells. It is made of high-quality aluminum alloy with Max. 90 MPa pressure for each hole, and it is designed for high throughput research of ceramic materials. SPECIFICATIONS: Material 7075 Aluminium alloy Tensile Strength: 524Mpa 0.2% Yield strength: 455Mpa Hardness: 150HB Max. working temperature 150oC Well Options 9 wells and 25 wells are standard products, Please choose from the product option bar The customized well number is available upon request at the extra cost Related High throughput Device May choose MSK-SFM-50 plate shaker as HTP mixer ( Click Pic 1 to order ) May use YLJ-HP300 the flat hot press to press multi-well die ( Pic. 2) Please use XRF-32-LD for automatic composition analysis by the XRF scanning system ( Click Pic. 3 Pic. 1 Pic. 2 Pic. 3 Cautions WARNING: DO NOT press flammable, corrosive, or explosive materials Attention: To achieve the best result, please ensure the volume of sample powder in all 32 pressing dies are the same. Use ethanol to clean the pressing die before and after use every time Use anti-rust oil after the operation and store it in a dry place to avoid rusting. 3'' Dia. Sieve Set No.200&450 Mesh can be used to separate the 32~75 microns particles from the powder clumps . Steps to make a sample pellet Mixing and grinding chemical powder by agate mortar or Ball Mill Calcine mixed the powder in a high temp furnace under a suitable temperature Crushing and Grinding calcined powder again by mortar or ball mill Put calcined powder into the die Pressing sample by a pressing machine under suitable pressure Take out the pellet sample from die Sintering the pellet under a suitable temperature in Oven Then, a new material sample is formed! Related Products Pressing Die 1/8" - 3" Powder grinding & Mixing Drying Ovens Calcining & Sintering Hydraulic Press CIP - Cold Isostatic Press

Material	7075 Aluminium alloy Tensile Strength: 524Mpa 0.2% Yield strength: 455Mpa Hardness: 150HB Max. working temperature 150oC
Well Options	9 wells and 25 wells are standard products, Please choose from the product option bar The customized well number is available upon request at the extra cost
Related High throughput Device	May choose MSK-SFM-50 plate shaker as HTP mixer ( Click Pic 1 to order ) May use YLJ-HP300 the flat hot press to press multi-well die ( Pic. 2) Please use XRF-32-LD for automatic composition analysis by the XRF scanning system ( Click Pic. 3 Pic. 1 Pic. 2 Pic. 3
Cautions	WARNING: DO NOT press flammable, corrosive, or explosive materials Attention: To achieve the best result, please ensure the volume of sample powder in all 32 pressing dies are the same. Use ethanol to clean the pressing die before and after use every time Use anti-rust oil after the operation and store it in a dry place to avoid rusting. 3'' Dia. Sieve Set No.200&450 Mesh can be used to separate the 32~75 microns particles from the powder clumps .
Steps to make a sample pellet	Mixing and grinding chemical powder by agate mortar or Ball Mill Calcine mixed the powder in a high temp furnace under a suitable temperature Crushing and Grinding calcined powder again by mortar or ball mill Put calcined powder into the die Pressing sample by a pressing machine under suitable pressure Take out the pellet sample from die Sintering the pellet under a suitable temperature in Oven Then, a new material sample is formed!